Vauxhall Vectra 2.0 DTI 16v 100bhp tuning file
(C) (2002–2009) · Diesel · ECU: Bosch EDC15M / Bosch PSG16
Stage 1 remap: +25 bhp & +50 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Vauxhall Vectra 2.0 DTI 16v 100bhp from 100 bhp and 205 Nm to 125 bhp and 255 Nm – that's +25 bhp (25%) and +50 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC15M / Bosch PSG16 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 100 → 125 bhp equals roughly 75 → 93 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1994 CC |
| Compression ratio | 18.5 : 1 |
| Bore × stroke | 84.0 X 90.0 mm |
| Engine code | Y20DTH |
Other Vauxhall Vectra (C) (2002–2009) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.