UK support desk online Mon–Fri 07:00–21:00 · Sat 09:00–16:00 (UK time)

Ford Kuga 2.0 TDCi 180bhp tuning file

2013 (2016) · Diesel · ECU: Delphi DCM6.1

Stage 1 remap: +20 bhp & +50 Nm

Ford Kuga 2.0 TDCi 180bhp · 180 bhp · 400 Nm
Search another vehicle
Power+20 bhp · +11%
Standard180bhp
Remapped200bhp
Torque+50 Nm · +12%
Standard400Nm
Remapped450Nm

ECU

Delphi DCM6.1

Read methods

Alientech KESSv2Autotuner AutotunerCMD CMDFlash

Available solutions

AdblueDPF OFFDTC RemovalEGR OFFFLAPSVmax
Order this tuning file Ask on WhatsApp
Stage 1 from €42 · solutions from €21

With a bespoke remap the Ford Kuga 2.0 TDCi 180bhp gains +20 bhp and +50 Nm, rising from 180 bhp / 400 Nm to 200 bhp / 450 Nm (11% more power). We build each tuning file around the software number of your read on the Delphi DCM6.1, so nothing generic goes back into the car. Add Adblue, DPF OFF, DTC Removal, EGR OFF to the same file if needed.

Who is this remap for?

On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 180 → 200 bhp equals roughly 134 → 149 kW.

Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.

Engine specification

Fuel type Diesel
Engine size 1997 CC
Compression ratio 16.7 : 1
Bore × stroke 85.0 X 88.0 mm
Engine code T8MA
5 credits on us

Try our tuning file service today

Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.