Ford Kuga 2.0 TDCi 150bhp tuning file
2013 (2016) · Diesel · ECU: Delphi DCM3.5 / Delphi DCM6.1
Stage 1 remap: +45 bhp & +70 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Ford Kuga 2.0 TDCi 150bhp gains +45 bhp and +70 Nm, rising from 150 bhp / 370 Nm to 195 bhp / 440 Nm (30% more power). We build each tuning file around the software number of your read on the Delphi DCM3.5 / Delphi DCM6.1, so nothing generic goes back into the car. Add DPF / EGR solutions to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 150 → 195 bhp equals roughly 112 → 145 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1997 CC |
| Compression ratio | 16.7 : 1 |
| Bore × stroke | 85.0 X 88.0 mm |
| Engine code | T7MA |
Other Ford Kuga 2013 (2016) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.