Volvo XC90 2.0 D5 Polestar 240bhp tuning file
2014 (2019) · Diesel · ECU: Denso VEA
Stage 1 remap: +50 bhp & +80 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Volvo XC90 2.0 D5 Polestar 240bhp gains +50 bhp and +80 Nm, rising from 240 bhp / 500 Nm to 290 bhp / 580 Nm (21% more power). We build each tuning file around the software number of your read on the Denso VEA, so nothing generic goes back into the car. Add Adblue, DPF OFF, DTC Removal, EGR OFF to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 240 → 290 bhp equals roughly 179 → 216 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1969 CC |
| Compression ratio | 15.8 : 1 |
| Bore × stroke | 82.0 X 93.2 mm |
| Engine code | D4204T23 |
Other Volvo XC90 2014 (2019) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.