Volvo V90 2.0 D5 Polestar 240bhp tuning file
2016– · Diesel · ECU: Denso VEA
Stage 1 remap: +46 bhp & +45 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Volvo V90 2.0 D5 Polestar 240bhp from 240 bhp and 500 Nm to 286 bhp and 545 Nm – that's +46 bhp (19%) and +45 Nm more. The remap file is written by a calibrator for your exact software on the Denso VEA and returned through the portal, normally within 5–15 minutes. Solutions such as DTC Removal can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 240 → 286 bhp equals roughly 179 → 213 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1969 CC |
| Compression ratio | 15.8 : 1 |
| Bore × stroke | 82.0 X 93.2 mm |
| Engine code | D4204T23 |
Other Volvo V90 2016– engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.