Vauxhall Insignia 2.0 CDTi 130bhp tuning file
2013 (2015) · Diesel · ECU: Bosch EDC17C19 / Bosch EDC17C59
Stage 1 remap: +60 bhp & +100 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Vauxhall Insignia 2.0 CDTi 130bhp from 130 bhp and 300 Nm to 190 bhp and 400 Nm – that's +60 bhp (46%) and +100 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC17C19 / Bosch EDC17C59 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 130 → 190 bhp equals roughly 97 → 142 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1956 CC |
| Compression ratio | 16.5 : 1 |
| Bore × stroke | 83.0 X 90.4 mm |
| Engine code | A20DTH |
Other Vauxhall Insignia 2013 (2015) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.