Vauxhall Insignia 2.8 OPC V6 Turbo 325bhp tuning file
2008 (2013) · Petrol · ECU: Bosch ME9.6.1
Stage 1 remap: +35 bhp & +115 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Vauxhall Insignia 2.8 OPC V6 Turbo 325bhp from 325 bhp and 435 Nm to 360 bhp and 550 Nm – that's +35 bhp (11%) and +115 Nm more. The remap file is written by a calibrator for your exact software on the Bosch ME9.6.1 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 325 → 360 bhp equals roughly 242 → 268 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 2792 CC |
| Compression ratio | 9.5 : 1 |
| Bore × stroke | 89.0 X 74.8 mm |
| Engine code | A28NET |
Other Vauxhall Insignia 2008 (2013) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.