Peugeot 508 1.6 Puretech Hybrid 180bhp tuning file
Ph3 (2018–) · Petrol PHEV · ECU: Bosch MG1CS042
Stage 1 remap: +35 bhp & +50 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Peugeot 508 1.6 Puretech Hybrid 180bhp gains +35 bhp and +50 Nm, rising from 180 bhp / 250 Nm to 215 bhp / 300 Nm (19% more power). We build each tuning file around the software number of your read on the Bosch MG1CS042, so nothing generic goes back into the car. Add DPF / EGR solutions to the same file if needed.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 180 → 215 bhp equals roughly 134 → 160 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol PHEV |
| Engine size | 1598 CC |
| Compression ratio | 10.5 : 1 |
| Bore × stroke | 77.0 X 85.8 mm |
| Engine code | 5GF EP6FADTXD |
Other Peugeot 508 Ph3 (2018–) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.