Opel Vectra 1.9 CDTi 8v 120bhp tuning file
(C) (2002–2009) · Diesel · ECU: Bosch EDC16C39
Stage 1 remap: +30 bhp & +60 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Opel Vectra 1.9 CDTi 8v 120bhp from 120 bhp and 280 Nm to 150 bhp and 340 Nm – that's +30 bhp (25%) and +60 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC16C39 and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 120 → 150 bhp equals roughly 89 → 112 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1910 CC |
| Compression ratio | 18.0 : 1 |
| Bore × stroke | 82.0 X 90.4 mm |
| Engine code | Z19DT |
Other Opel Vectra (C) (2002–2009) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.