Dacia Logan 1.5 DCI 90bhp tuning file
2016 (2020) · Diesel · ECU: Bosch EDC17C42 / Bosch EDC17C84
Stage 1 remap: +30 bhp & +60 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Dacia Logan 1.5 DCI 90bhp gains +30 bhp and +60 Nm, rising from 90 bhp / 200 Nm to 120 bhp / 260 Nm (33% more power). We build each tuning file around the software number of your read on the Bosch EDC17C42 / Bosch EDC17C84, so nothing generic goes back into the car. Add Adblue, DPF OFF, DTC Removal, EGR OFF to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 90 → 120 bhp equals roughly 67 → 89 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1461 CC |
| Compression ratio | 15.2 : 1 |
| Bore × stroke | 76.0 X 80.5 mm |
| Engine code | K9KCXX6 |
Other Dacia Logan 2016 (2020) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.