Dacia Logan 1.0 TCe 100bhp tuning file
2016 (2020) · Petrol · ECU: Siemens/Continental EMS3150
Stage 1 remap: +25 bhp & +40 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Dacia Logan 1.0 TCe 100bhp from 100 bhp and 160 Nm to 125 bhp and 200 Nm – that's +25 bhp (25%) and +40 Nm more. The remap file is written by a calibrator for your exact software on the Siemens/Continental EMS3150 and returned through the portal, normally within 5–15 minutes. Solutions such as DTC Removal can go into the same file.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 100 → 125 bhp equals roughly 75 → 93 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 999 CC |
| Compression ratio | 9.5 : 1 |
| Bore × stroke | 72.2 X 73.1 mm |
| Engine code | H4D |
Other Dacia Logan 2016 (2020) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.