Volvo V40 Cross Country 2.0 D3 150bhp tuning file
2013– · Diesel · ECU: Bosch EDC17CP48 / Denso MB279700-96xx
Stage 1 remap: +50 bhp & +100 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Volvo V40 Cross Country 2.0 D3 150bhp from 150 bhp and 350 Nm to 200 bhp and 450 Nm – that's +50 bhp (33%) and +100 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC17CP48 / Denso MB279700-96xx and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 150 → 200 bhp equals roughly 112 → 149 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1969 CC |
| Compression ratio | 16.0 : 1 |
| Bore × stroke | 82.0 X 93.2 mm |
| Engine code | D4204T9 |
Other Volvo V40 Cross Country 2013– engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.