Volvo S60 2.0 D2 120bhp tuning file
2015 (2017) · Diesel · ECU: Denso VEA / Denso MB279700-96xx
Stage 1 remap: +50 bhp & +100 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Volvo S60 2.0 D2 120bhp from 120 bhp and 280 Nm to 170 bhp and 380 Nm – that's +50 bhp (42%) and +100 Nm more. The remap file is written by a calibrator for your exact software on the Denso VEA / Denso MB279700-96xx and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 120 → 170 bhp equals roughly 89 → 127 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1969 CC |
| Compression ratio | 16.0 : 1 |
| Bore × stroke | 82.0 X 93.2 mm |
| Engine code | D4204T8 |
Other Volvo S60 2015 (2017) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.