Volkswagen Passat CC 2.0 TDI CR 140bhp tuning file
All years · Diesel · ECU: Bosch EDC17C46 / Bosch EDC17CP20 / Bosch EDC17CP14
Stage 1 remap: +40 bhp & +90 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Volkswagen Passat CC 2.0 TDI CR 140bhp gains +40 bhp and +90 Nm, rising from 140 bhp / 320 Nm to 180 bhp / 410 Nm (29% more power). We build each tuning file around the software number of your read on the Bosch EDC17C46 / Bosch EDC17CP20 / Bosch EDC17CP14, so nothing generic goes back into the car. Add DPF / EGR solutions to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 140 → 180 bhp equals roughly 104 → 134 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1968 CC |
| Compression ratio | 16.5 : 1 |
| Bore × stroke | 81.0 X 95.5 mm |
| Engine code | CBAB |
Other Volkswagen Passat CC All years engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.