Vauxhall Mokka 1.6 CDTI 136bhp tuning file
2012 (2016) · Diesel · ECU: Delco E98
Stage 1 remap: +24 bhp & +60 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Vauxhall Mokka 1.6 CDTI 136bhp gains +24 bhp and +60 Nm, rising from 136 bhp / 320 Nm to 160 bhp / 380 Nm (18% more power). We build each tuning file around the software number of your read on the Delco E98, so nothing generic goes back into the car. Add DPF / EGR solutions to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 136 → 160 bhp equals roughly 101 → 119 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1598 CC |
| Compression ratio | 16.0 : 1 |
| Bore × stroke | 79.7 X 80.1 mm |
| Engine code | B16DTH |
Other Vauxhall Mokka 2012 (2016) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.