Vauxhall Meriva 1.3 CDTi 95bhp tuning file
(B) (2010–2013) · Diesel · ECU: Bosch EDC17C19 / Bosch EDC17C59
Stage 1 remap: +20 bhp & +50 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Vauxhall Meriva 1.3 CDTi 95bhp from 95 bhp and 180 Nm to 115 bhp and 230 Nm – that's +20 bhp (21%) and +50 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC17C19 / Bosch EDC17C59 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 95 → 115 bhp equals roughly 71 → 86 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1248 CC |
| Compression ratio | 18.0 : 1 |
| Bore × stroke | 69.6 X 82.0 mm |
| Engine code | Z13DTH |
Other Vauxhall Meriva (B) (2010–2013) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.