Vauxhall Crossland X 1.5 CDTi 120bhp tuning file
2017 (2020) · Diesel · ECU: Bosch MD1CS003
Stage 1 remap: +40 bhp & +60 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Vauxhall Crossland X 1.5 CDTi 120bhp from 120 bhp and 300 Nm to 160 bhp and 360 Nm – that's +40 bhp (33%) and +60 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MD1CS003 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 120 → 160 bhp equals roughly 89 → 119 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1499 CC |
| Compression ratio | 16.4 : 1 |
| Bore × stroke | 75.0 X 84.8 mm |
| Engine code | D15DH |
Other Vauxhall Crossland X 2017 (2020) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.