Toyota ProAce 2.0 D-4D 180bhp Euro6 tuning file
2016 (2019) · Diesel · ECU: Delphi DCM6.2A / Delphi DCM7.1A
Stage 1 remap: +25 bhp & +60 Nm
ECU
Read methods
Available solutions
Upload the original read of your Toyota ProAce 2.0 D-4D 180bhp Euro6 and we'll return a Stage 1 tuning file worth 205 bhp and 460 Nm – up from 180 bhp and 400 Nm, an increase of +25 bhp (14%) and +60 Nm. Every file is checked by a calibrator on the Delphi DCM6.2A / Delphi DCM7.1A before release, and Adblue, DPF OFF, DTC Removal, EGR OFF can be combined in one upload.
Who is this remap for?
Diesel vans and pick-ups are among the most popular remaps in the UK. The extra low-down torque makes towing and carrying a load noticeably easier, and drivers often see better economy because the engine works less hard. 180 → 205 bhp equals roughly 134 → 153 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1997 CC |
| Compression ratio | 16.0 : 1 |
| Bore × stroke | 85.0 X 88.0 mm |
| Engine code | 4WZ-FHV |
Other Toyota ProAce 2016 (2019) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.