Toyota Landcruiser 4.5 D4-D 286bhp tuning file
2002 (2010) · Diesel · ECU: Denso 275922-001 (CAN) / Denso RX703200
Stage 1 remap: +44 bhp & +100 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Toyota Landcruiser 4.5 D4-D 286bhp from 286 bhp and 650 Nm to 330 bhp and 750 Nm – that's +44 bhp (15%) and +100 Nm more. The remap file is written by a calibrator for your exact software on the Denso 275922-001 (CAN) / Denso RX703200 and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 286 → 330 bhp equals roughly 213 → 246 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 4461 CC |
| Compression ratio | 16.8 : 1 |
| Bore × stroke | 86.0 X 96.0 mm |
| Engine code | 1VD-FTV |
Other Toyota Landcruiser 2002 (2010) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.