Skoda Superb 3.6 FSI 260bhp tuning file
2008 (2015) · Petrol · ECU: Bosch MED9.1 / Bosch MED17.6.1
Stage 1 remap: +20 bhp & +20 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Skoda Superb 3.6 FSI 260bhp from 260 bhp and 350 Nm to 280 bhp and 370 Nm – that's +20 bhp (8%) and +20 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MED9.1 / Bosch MED17.6.1 and returned through the portal, normally within 5–15 minutes. Solutions such as Anti lag, DECAT, DTC Removal, FLAPS can go into the same file.
Who is this remap for?
Naturally aspirated petrol engines gain less than turbo engines, but a remap still improves throttle response and smooths out flat spots in the power delivery. 260 → 280 bhp equals roughly 194 → 209 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 3580 CC |
| Compression ratio | 10.6 : 1 |
| Bore × stroke | 82.0 X 92.8 mm |
| Engine code | CDV |
Other Skoda Superb 2008 (2015) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.