Skoda Octavia 2.0 TDI 115bhp tuning file
2020– · Diesel · ECU: Bosch MD1CS004
Stage 1 remap: +80 bhp & +130 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Skoda Octavia 2.0 TDI 115bhp gains +80 bhp and +130 Nm, rising from 115 bhp / 300 Nm to 195 bhp / 430 Nm (70% more power). We build each tuning file around the software number of your read on the Bosch MD1CS004, so nothing generic goes back into the car. Add DPF / EGR solutions to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 115 → 195 bhp equals roughly 86 → 145 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1968 CC |
| Compression ratio | 16.2 : 1 |
| Bore × stroke | 81.0 X 95.5 mm |
| Engine code | DSUD / DTR |
Other Skoda Octavia 2020– engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.