Skoda Octavia 2.0 TDI CR 184bhp tuning file
2013 (2016) · Diesel · ECU: Bosch EDC17C64 / Bosch EDC17C74
Stage 1 remap: +41 bhp & +80 Nm
ECU
Read methods
Available solutions
Upload the original read of your Skoda Octavia 2.0 TDI CR 184bhp and we'll return a Stage 1 tuning file worth 225 bhp and 460 Nm – up from 184 bhp and 380 Nm, an increase of +41 bhp (22%) and +80 Nm. Every file is checked by a calibrator on the Bosch EDC17C64 / Bosch EDC17C74 before release, and DPF OFF, DTC Removal, EGR OFF, FLAPS can be combined in one upload.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 184 → 225 bhp equals roughly 137 → 168 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1968 CC |
| Compression ratio | 15.8 : 1 |
| Bore × stroke | 81.0 X 95.5 mm |
| Engine code | CUPA |
Other Skoda Octavia 2013 (2016) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.