Seat Ateca 2.0 TDI 190bhp tuning file
2020– · Diesel
Stage 1 remap: +35 bhp & +60 Nm
ECU
Read methods
Available solutions
Upload the original read of your Seat Ateca 2.0 TDI 190bhp and we'll return a Stage 1 tuning file worth 225 bhp and 460 Nm – up from 190 bhp and 400 Nm, an increase of +35 bhp (18%) and +60 Nm. Every file is checked by a calibrator before release, and DPF / EGR solutions can be combined in one upload.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 190 → 225 bhp equals roughly 142 → 168 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1968 CC |
| Compression ratio | 16.2 : 1 |
| Bore × stroke | 81.0 X 95.5 mm |
| Engine code | DFHA |
Other Seat Ateca 2020– engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.