Porsche Panamera 3.0 TDI 250bhp tuning file
970 (2013–2016) · Diesel · ECU: Bosch EDC17CP44
Stage 1 remap: +40 bhp & +70 Nm
ECU
Read methods
Available solutions
Upload the original read of your Porsche Panamera 3.0 TDI 250bhp and we'll return a Stage 1 tuning file worth 290 bhp and 620 Nm – up from 250 bhp and 550 Nm, an increase of +40 bhp (16%) and +70 Nm. Every file is checked by a calibrator on the Bosch EDC17CP44 before release, and Adblue, FLAPS, Launch control, Pop & Bang Crackle map can be combined in one upload.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 250 → 290 bhp equals roughly 186 → 216 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 2967 CC |
| Compression ratio | 16.8 : 1 |
| Bore × stroke | 83.0 X 91.4 mm |
| Engine code | MCR.CC |
Other Porsche Panamera 970 (2013–2016) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.