Porsche Cayenne 3.0 TDI 211bhp tuning file
958 (2010–2014) · Diesel · ECU: Bosch EDC17CP44
Stage 1 remap: +89 bhp & +80 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Porsche Cayenne 3.0 TDI 211bhp from 211 bhp and 550 Nm to 300 bhp and 630 Nm – that's +89 bhp (42%) and +80 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC17CP44 and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DTC Removal, FLAPS, Launch control can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 211 → 300 bhp equals roughly 157 → 224 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 2967 CC |
| Compression ratio | 16.8 : 1 |
| Bore × stroke | 83.0 X 91.4 mm |
| Engine code | MCR.CB |
Other Porsche Cayenne 958 (2010–2014) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.