Peugeot RCZ 1.6 THP 200bhp tuning file
Ph1 (2010–2013) · Petrol · ECU: Bosch MED17.4.2
Stage 1 remap: +20 bhp & +85 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Peugeot RCZ 1.6 THP 200bhp gains +20 bhp and +85 Nm, rising from 200 bhp / 275 Nm to 220 bhp / 360 Nm (10% more power). We build each tuning file around the software number of your read on the Bosch MED17.4.2, so nothing generic goes back into the car. Add DECAT, DTC Removal, FLAPS, Pop & Bang Crackle map to the same file if needed.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 200 → 220 bhp equals roughly 149 → 164 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 1598 CC |
| Compression ratio | 10.5 : 1 |
| Bore × stroke | 77.0 X 85.8 mm |
| Engine code | EP6CDTX |
Other Peugeot RCZ Ph1 (2010–2013) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.