Peugeot 508 2.0 HDi 140bhp tuning file
Ph1 (2010–2014) · Diesel · ECU: Bosch EDC17CP42 / Delphi DCM3.4
Stage 1 remap: +35 bhp & +60 Nm
ECU
Read methods
Available solutions
Upload the original read of your Peugeot 508 2.0 HDi 140bhp and we'll return a Stage 1 tuning file worth 175 bhp and 380 Nm – up from 140 bhp and 320 Nm, an increase of +35 bhp (25%) and +60 Nm. Every file is checked by a calibrator on the Bosch EDC17CP42 / Delphi DCM3.4 before release, and Adblue, DPF OFF, DTC Removal, EGR OFF can be combined in one upload.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 140 → 175 bhp equals roughly 104 → 130 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1997 CC |
| Compression ratio | 16.0 : 1 |
| Bore × stroke | 85.0 X 88.0 mm |
| Engine code | RH01 |
Other Peugeot 508 Ph1 (2010–2014) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.