Opel Meriva 1.7 CDTi 110bhp tuning file
(B) (2014–) · Diesel · ECU: Ac Delco E87
Stage 1 remap: +50 bhp & +70 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Opel Meriva 1.7 CDTi 110bhp from 110 bhp and 280 Nm to 160 bhp and 350 Nm – that's +50 bhp (45%) and +70 Nm more. The remap file is written by a calibrator for your exact software on the Ac Delco E87 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 110 → 160 bhp equals roughly 82 → 119 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1686 CC |
| Compression ratio | 16.5 : 1 |
| Bore × stroke | 79.0 X 86.0 mm |
| Engine code | Z17DTH |
Other Opel Meriva (B) (2014–) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.