Opel Meriva 1.7 CDTi 100bhp tuning file
(A) (2003–2010) · Diesel · ECU: Denso DEC30 / Denso D0700
Stage 1 remap: +30 bhp & +60 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Opel Meriva 1.7 CDTi 100bhp from 100 bhp and 240 Nm to 130 bhp and 300 Nm – that's +30 bhp (30%) and +60 Nm more. The remap file is written by a calibrator for your exact software on the Denso DEC30 / Denso D0700 and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 100 → 130 bhp equals roughly 75 → 97 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1686 CC |
| Compression ratio | 16.5 : 1 |
| Bore × stroke | 79.0 X 86.0 mm |
| Engine code | Z17DTH |
Other Opel Meriva (A) (2003–2010) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.