Opel Insignia 2.0 CDTi 160bhp tuning file
2008 (2013) · Diesel · ECU: Bosch EDC17C19 / Bosch EDC17C59
Stage 1 remap: +40 bhp & +70 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Opel Insignia 2.0 CDTi 160bhp gains +40 bhp and +70 Nm, rising from 160 bhp / 350 Nm to 200 bhp / 420 Nm (25% more power). We build each tuning file around the software number of your read on the Bosch EDC17C19 / Bosch EDC17C59, so nothing generic goes back into the car. Add Adblue, DPF OFF, DTC Removal, EGR OFF to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 160 → 200 bhp equals roughly 119 → 149 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1956 CC |
| Compression ratio | 16.5 : 1 |
| Bore × stroke | 83.0 X 90.4 mm |
| Engine code | A20DTH |
Other Opel Insignia 2008 (2013) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.