Opel Adam 1.0T 115bhp tuning file
2013– · Petrol · ECU: Delco E80
Stage 1 remap: +15 bhp & +54 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Opel Adam 1.0T 115bhp from 115 bhp and 166 Nm to 130 bhp and 220 Nm – that's +15 bhp (13%) and +54 Nm more. The remap file is written by a calibrator for your exact software on the Delco E80 and returned through the portal, normally within 5–15 minutes. Solutions such as DECAT, DTC Removal, Pop & Bang Crackle map, Vmax can go into the same file.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 115 → 130 bhp equals roughly 86 → 97 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 999 CC |
| Compression ratio | 10.5 : 1 |
| Bore × stroke | 74.0 X 77.4 mm |
| Engine code | B10XFL |
Other Opel Adam 2013– engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.