Nissan Qashqai 1.6 DCi 130bhp tuning file
2017 (2019) · Diesel · ECU: Bosch EDC17C84
Stage 1 remap: +30 bhp & +60 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Nissan Qashqai 1.6 DCi 130bhp from 130 bhp and 320 Nm to 160 bhp and 380 Nm – that's +30 bhp (23%) and +60 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC17C84 and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 130 → 160 bhp equals roughly 97 → 119 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1598 CC |
| Compression ratio | 15.4 : 1 |
| Bore × stroke | 80.0 X 79.5 mm |
| Engine code | R9M |
Other Nissan Qashqai 2017 (2019) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.