Nissan Note 1.5 DCi 90bhp tuning file
2013– · Diesel · ECU: Delphi DCM3.4 / Bosch EDC17C42 / Bosch EDC17C84
Stage 1 remap: +20 bhp & +60 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Nissan Note 1.5 DCi 90bhp from 90 bhp and 200 Nm to 110 bhp and 260 Nm – that's +20 bhp (22%) and +60 Nm more. The remap file is written by a calibrator for your exact software on the Delphi DCM3.4 / Bosch EDC17C42 / Bosch EDC17C84 and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 90 → 110 bhp equals roughly 67 → 82 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1461 CC |
| Compression ratio | 15.2 : 1 |
| Bore × stroke | 76.0 X 80.5 mm |
| Engine code | K9K |
Other Nissan Note 2013– engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.