Mitsubishi Pajero 3.2 DiD 190bhp tuning file
All years · Diesel · ECU: Denso RA6 4N13 / Denso SH7059
Stage 1 remap: +50 bhp & +59 Nm
ECU
Read methods
Available solutions
Upload the original read of your Mitsubishi Pajero 3.2 DiD 190bhp and we'll return a Stage 1 tuning file worth 240 bhp and 500 Nm – up from 190 bhp and 441 Nm, an increase of +50 bhp (26%) and +59 Nm. Every file is checked by a calibrator on the Denso RA6 4N13 / Denso SH7059 before release, and DPF OFF, DTC Removal, EGR OFF, FLAPS can be combined in one upload.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 190 → 240 bhp equals roughly 142 → 179 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 3200 CC |
| Compression ratio | 17.0 : 1 |
| Bore × stroke | 98.5 X 105.0 mm |
| Engine code | 4M41 |
Other Mitsubishi Pajero All years engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.