Mitsubishi Lancer EVO 2.0 Turbo 295bhp tuning file
X · Petrol · ECU: Mitsubishi E6T72xxx / Mitsubishi E6T79089
Stage 1 remap: +35 bhp & +64 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Mitsubishi Lancer EVO 2.0 Turbo 295bhp gains +35 bhp and +64 Nm, rising from 295 bhp / 366 Nm to 330 bhp / 430 Nm (12% more power). We build each tuning file around the software number of your read on the Mitsubishi E6T72xxx / Mitsubishi E6T79089, so nothing generic goes back into the car. Add DPF / EGR solutions to the same file if needed.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 295 → 330 bhp equals roughly 220 → 246 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 1998 CC |
| Compression ratio | 9.0 : 1 |
| Bore × stroke | 86.0 X 86.0 mm |
| Engine code | 4B11T |
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.