Mercedes Benz GLA 200d (2.0D) 150bhp tuning file
H247 (2020–) · Diesel · ECU: Bosch MD1
Stage 1 remap: +50 bhp & +120 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Mercedes Benz GLA 200d (2.0D) 150bhp from 150 bhp and 320 Nm to 200 bhp and 440 Nm – that's +50 bhp (33%) and +120 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MD1 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF OFF, DTC Removal, EGR OFF, START/STOP OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 150 → 200 bhp equals roughly 112 → 149 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1950 CC |
| Compression ratio | 15.5 : 1 |
| Bore × stroke | 82.0 X 92.3 mm |
| Engine code | OM654 DE20 |
Other Mercedes Benz GLA H247 (2020–) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.