Mercedes Benz A 180d (1.5D) 116bhp tuning file
W177 (2018–) · Diesel · ECU: Bosch MD1CS006
Stage 1 remap: +19 bhp & +70 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Mercedes Benz A 180d (1.5D) 116bhp from 116 bhp and 260 Nm to 135 bhp and 330 Nm – that's +19 bhp (16%) and +70 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MD1CS006 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF OFF, DTC Removal, EGR OFF, START/STOP OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 116 → 135 bhp equals roughly 87 → 101 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1461 CC |
| Compression ratio | 15.1 : 1 |
| Bore × stroke | 76.0 X 80.5 mm |
| Engine code | OM608.915 |
Other Mercedes Benz A W177 (2018–) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.