UK support desk online Mon–Fri 07:00–21:00 · Sat 09:00–16:00 (UK time)

MAN TGE 2.0 TDI CR 140bhp tuning file

2017– · Diesel · ECU: Delphi DCM6.2V

Stage 1 remap: +45 bhp & +70 Nm

MAN TGE 2.0 TDI CR 140bhp · 140 bhp · 340 Nm
Search another vehicle
Power+45 bhp · +32%
Standard140bhp
Remapped185bhp
Torque+70 Nm · +21%
Standard340Nm
Remapped410Nm

ECU

Delphi DCM6.2V

Read methods

Autotuner AutotunerCMD CMDFlashMagicMotorsport Flex

Available solutions

AdblueDPF OFFDTC RemovalEGR OFFFLAPSLaunch controlSTART/STOP OFFVmax
Order this tuning file Ask on WhatsApp
Stage 1 from €42 · solutions from €21

With a bespoke remap the MAN TGE 2.0 TDI CR 140bhp gains +45 bhp and +70 Nm, rising from 140 bhp / 340 Nm to 185 bhp / 410 Nm (32% more power). We build each tuning file around the software number of your read on the Delphi DCM6.2V, so nothing generic goes back into the car. Add Adblue, DPF OFF, DTC Removal, EGR OFF to the same file if needed.

Who is this remap for?

On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 140 → 185 bhp equals roughly 104 → 138 kW.

Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.

Engine specification

Fuel type Diesel
Engine size 1968 CC
Compression ratio 16.0 : 1
Bore × stroke 81.0 X 95.5 mm
5 credits on us

Try our tuning file service today

Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.