Land Rover Evoque D150 (2.0D) 150bhp tuning file
2019– · Diesel MHEV · ECU: Bosch EDC17CP55 / Bosch MED17.9.X / Bosch MEDC17.9.3
Stage 1 remap: +40 bhp & +80 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Land Rover Evoque D150 (2.0D) 150bhp gains +40 bhp and +80 Nm, rising from 150 bhp / 380 Nm to 190 bhp / 460 Nm (27% more power). We build each tuning file around the software number of your read on the Bosch EDC17CP55 / Bosch MED17.9.X / Bosch MEDC17.9.3, so nothing generic goes back into the car. Add DPF / EGR solutions to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 150 → 190 bhp equals roughly 112 → 142 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel MHEV |
| Engine size | 1999 CC |
| Compression ratio | 15.5 : 1 |
| Bore × stroke | 83.0 X 92.4 mm |
| Engine code | 204DTD |
Other Land Rover Evoque 2019– engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.