Land Rover Discovery 2.0 SD4 240bhp tuning file
2017 (2020) · Diesel · ECU: Bosch MEDC17.9 / Bosch MED17.9.7
Stage 1 remap: +20 bhp & +50 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Land Rover Discovery 2.0 SD4 240bhp from 240 bhp and 500 Nm to 260 bhp and 550 Nm – that's +20 bhp (8%) and +50 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MEDC17.9 / Bosch MED17.9.7 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 240 → 260 bhp equals roughly 179 → 194 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1999 CC |
| Compression ratio | 15.5 : 1 |
| Bore × stroke | 83.0 X 92.4 mm |
| Engine code | 204DTA |
Other Land Rover Discovery 2017 (2020) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.