Jeep Wrangler 3.6 V6 285bhp tuning file
2010 (2016) · Petrol · ECU: Motorola NGC5 / Siemens/Continental GPEC2A
Stage 1 remap: +20 bhp & +22 Nm
ECU
Read methods
Available solutions
Upload the original read of your Jeep Wrangler 3.6 V6 285bhp and we'll return a Stage 1 tuning file worth 305 bhp and 375 Nm – up from 285 bhp and 353 Nm, an increase of +20 bhp (7%) and +22 Nm. Every file is checked by a calibrator on the Motorola NGC5 / Siemens/Continental GPEC2A before release, and DECAT, FLAPS, Vmax can be combined in one upload.
Who is this remap for?
Naturally aspirated petrol engines gain less than turbo engines, but a remap still improves throttle response and smooths out flat spots in the power delivery. 285 → 305 bhp equals roughly 213 → 227 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 3604 CC |
| Compression ratio | 10.2 : 1 |
| Bore × stroke | 96.0 X 83.0 mm |
| Engine code | 3.6 Pentastar V6 |
Other Jeep Wrangler 2010 (2016) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.