Jeep Grand Cherokee 3.0 CRD 190bhp tuning file
2011 (2020) · Diesel · ECU: Bosch EDC17C79 / Bosch EDC17C49
Stage 1 remap: +90 bhp & +170 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Jeep Grand Cherokee 3.0 CRD 190bhp from 190 bhp and 440 Nm to 280 bhp and 610 Nm – that's +90 bhp (47%) and +170 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC17C79 / Bosch EDC17C49 and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 190 → 280 bhp equals roughly 142 → 209 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 2987 CC |
| Compression ratio | 17.7 : 1 |
| Bore × stroke | 83.0 X 92.0 mm |
| Engine code | OM642.980 |
Other Jeep Grand Cherokee 2011 (2020) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.