Hyundai ix55 3.0 V6 CRDi 240bhp tuning file
2008– · Diesel · ECU: Bosch EDC16CP34 / Bosch EDC17CP14
Stage 1 remap: +40 bhp & +80 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Hyundai ix55 3.0 V6 CRDi 240bhp from 240 bhp and 450 Nm to 280 bhp and 530 Nm – that's +40 bhp (17%) and +80 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC16CP34 / Bosch EDC17CP14 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 240 → 280 bhp equals roughly 179 → 209 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 2959 CC |
| Compression ratio | 17.3 : 1 |
| Bore × stroke | 84.0 X 89.0 mm |
| Engine code | D6EA |
Other Hyundai ix55 2008– engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.