Holden Colorado 2.8 181bhp tuning file
All years · Diesel · ECU: Bosch EDC16C39 / Delco E98
Stage 1 remap: +19 bhp & +30 Nm
ECU
Read methods
Available solutions
Upload the original read of your Holden Colorado 2.8 181bhp and we'll return a Stage 1 tuning file worth 200 bhp and 530 Nm – up from 181 bhp and 500 Nm, an increase of +19 bhp (10%) and +30 Nm. Every file is checked by a calibrator on the Bosch EDC16C39 / Delco E98 before release, and DPF OFF, DTC Removal, EGR OFF, FLAPS can be combined in one upload.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 181 → 200 bhp equals roughly 135 → 149 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 2800 CC |
| Compression ratio | 16.5 : 1 |
| Bore × stroke | 94.0 X 100.0 mm |
| Engine code | A 428 DOHC |
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.