Ford Territory 2.7 V6 TDCi 190bhp tuning file
All years · Diesel · ECU: Siemens/Continental SID204
Stage 1 remap: +35 bhp & +70 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Ford Territory 2.7 V6 TDCi 190bhp from 190 bhp and 440 Nm to 225 bhp and 510 Nm – that's +35 bhp (18%) and +70 Nm more. The remap file is written by a calibrator for your exact software on the Siemens/Continental SID204 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF OFF, DTC Removal, EGR OFF, START/STOP OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 190 → 225 bhp equals roughly 142 → 168 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 2720 CC |
| Compression ratio | 17.3 : 1 |
| Bore × stroke | 81.0 X 88.0 mm |
| Engine code | 2.7 Duratorq |
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.