Ford Ranger 2.5 TDCi 143bhp tuning file
-> 2010 · Diesel · ECU: Bosch EDC16C7-7
Stage 1 remap: +37 bhp & +90 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Ford Ranger 2.5 TDCi 143bhp from 143 bhp and 330 Nm to 180 bhp and 420 Nm – that's +37 bhp (26%) and +90 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC16C7-7 and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
Diesel vans and pick-ups are among the most popular remaps in the UK. The extra low-down torque makes towing and carrying a load noticeably easier, and drivers often see better economy because the engine works less hard. 143 → 180 bhp equals roughly 107 → 134 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 2499 CC |
| Compression ratio | 18.0 : 1 |
| Bore × stroke | 93.0 X 92.0 mm |
| Engine code | WL |
Other Ford Ranger -> 2010 engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.