Ford Focus 2.0 TDCI ST 185bhp tuning file
2014 (2017) · Diesel · ECU: Delphi DCM6.1 / Bosch MED17.0
Stage 1 remap: +30 bhp & +50 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Ford Focus 2.0 TDCI ST 185bhp from 185 bhp and 400 Nm to 215 bhp and 450 Nm – that's +30 bhp (16%) and +50 Nm more. The remap file is written by a calibrator for your exact software on the Delphi DCM6.1 / Bosch MED17.0 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 185 → 215 bhp equals roughly 138 → 160 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1997 CC |
| Compression ratio | 16.0 : 1 |
| Bore × stroke | 85.0 X 88.0 mm |
| Engine code | 2.0 Duratec TDC |
Other Ford Focus 2014 (2017) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.