Ford Fiesta 1.0T Ecoboost 140bhp tuning file
MK8 (2017–) · Petrol · ECU: Bosch MED17.0.7 / Bosch MG1CS016
Stage 1 remap: +5 bhp & +60 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Ford Fiesta 1.0T Ecoboost 140bhp from 140 bhp and 180 Nm to 145 bhp and 240 Nm – that's +5 bhp (4%) and +60 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MED17.0.7 / Bosch MG1CS016 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 140 → 145 bhp equals roughly 104 → 108 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 999 CC |
| Compression ratio | 10.0 : 1 |
| Bore × stroke | 71.9 X 82.0 mm |
| Engine code | YYJE / YYJG |
Other Ford Fiesta MK8 (2017–) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.