Fiat Panda 1.3 JTD 70bhp tuning file
All years · Diesel · ECU: Marelli MJD6JF
Stage 1 remap: +15 bhp & +35 Nm
ECU
Read methods
Available solutions
Upload the original read of your Fiat Panda 1.3 JTD 70bhp and we'll return a Stage 1 tuning file worth 85 bhp and 180 Nm – up from 70 bhp and 145 Nm, an increase of +15 bhp (21%) and +35 Nm. Every file is checked by a calibrator on the Marelli MJD6JF before release, and Adblue, DPF OFF, DTC Removal, EGR OFF can be combined in one upload.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 70 → 85 bhp equals roughly 52 → 63 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1248 CC |
| Compression ratio | 18.0 : 1 |
| Bore × stroke | 69.6 X 82.0 mm |
| Engine code | 188A9000 |
Other Fiat Panda All years engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.