Fiat Multipla 1.9 JTD 110bhp tuning file
All years · Diesel · ECU: Bosch EDC15C7
Stage 1 remap: +25 bhp & +95 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Fiat Multipla 1.9 JTD 110bhp from 110 bhp and 200 Nm to 135 bhp and 295 Nm – that's +25 bhp (23%) and +95 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC15C7 and returned through the portal, normally within 5–15 minutes. Solutions such as Adblue, DTC Removal, EGR OFF, FLAPS can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 110 → 135 bhp equals roughly 82 → 101 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1910 CC |
| Compression ratio | 18.5 : 1 |
| Bore × stroke | 82.0 X 90.4 mm |
| Engine code | 186A6000 |
Other Fiat Multipla All years engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.